丙烷泵的特点：
1.属容积式泵类，其有无机械密封.自吸能力强，自清理等特性！
2.无泵阀，填料函，不会产生密封类泵的泄漏和气阻现象！
3.结构简单，适应性强，液体.气体.浆状和粘稠悬浮物料均可输送，特别是光滑的软管空腔能泵吸有杂质的液体.各种纤维物体以及含粒径在软管直径1/4以下的固体料浆，且不产生任何堵塞。
4.运行前不需灌泵，干运行时，不会产生主轴封等故障，泵吸的液体仅与胶管接触，故能输送橡胶所能承受的腐蚀性及磨蚀性介质，可以代替一般不锈钢泵。
5.可以正反向旋转，不设定进出口，动力消耗少，水力和容积效率高。
6.具有很好的计量能力，可以用作计量泵，可通过选择管子的尺寸和调节转速改变流量，流量范围广（3—9m3/h）,计量精度.重复精度高。
7.管子材质繁多（乙烯塑料.尼龙.橡胶以及硅橡胶等），适用于输送各种腐蚀性.有毒.无菌.放射性等介质。管内径0.5-75mm,工作压力*高可达0.98Mpa,工作温度为--62~+260°C管子的挤压接触部分寿命一般为200~700h。当不能继续适用时，可移换管子的挤压部位或更换新管子。
8.1个泵头可装1—20根管子或者1台泵安装多组泵头工作，同时输送1种或多种介质。1泵多用，1台泵可代替数台泵（吸.排可同时作业），工作体积小.效率高。
The most popular bulk transfer pump. Utilizes the balanced 3-gear design. Is recommended as a heavy duty bulk plant pump with a capacity up to 100 GPM. Inlet and outlet ports are conveniently located on the sides of the pump to minimize restrictions caused by fittings such as elbows. MC-3H model delivers the same capacity as the MC-3 but at 1500 RPM. Both models available with flanges, either threaded or weld type.
Is reversible.
| PUMPS ONLY | AVERAGE DELIVERY RATE IN GPM | MAXIMUM DIFFERENTIAL PRESSURE | INLET/OUTLET SIZE: FEMALE THREADED | MOTOR | PUMP ROTATION AS LOOKING AT PUMP SHAFT-END |
|---|
| MODEL | 40 PSID, 1800 RPM | 75 PSID, 1800 RPM | PSI | INCHES | H.P. |
|---|
| MC-3 | 84 | 70 | 125 | 2.5 | 5 H.P. TO 40 PSID
7.5 H.P. OVER 75 PSID | REVERSIBLE |
| MC-3H | 84 @ 1500 RPM | 70 @ 1500 RPM | 125 | 2.5 | SAME AS ABOVE | REVERSIBLE |
