As with the P Series (equivalent to the PWO), the C Series (equivalent to the CSO) is manufactured and supplied in a wide variety of materials; from standard all Ductile Iron (DI), through DI/316SS fitted, to all 316SS, CD4Mcu or 20SS (Duplex Stainless Steels) to the more exotic Hastelloys. All bearing frames are separate from the bearing housings (as a modular construction) and can be supplied in Ductile Iron or 316SS (where gland leakage corrosion or similar is a potential problem). The bearing housings and end caps are normally in Ductile Iron but can again be manufactured in other materials (to suit environment and application).
Shafts are normally supplied in SAE 1045 Steel, with options of 316SS or Duplex Stainless Steel being available throughout the range.
In having created an all new design for the C Series, it should be noted that the hydraulics of the NEW design are equivalent to those of the OLD design; with the main design changes being limited to the upgrade of the power/drive end, and aesthetic facelift of the unit in general.
Pump Sizes:Tuff C Series
Group 1 Bearing Frame:
C1.5/1-6 = 1.5x1x6 CSO
C3/1.5-6 = 3x1.5x6 CSO
C3/2-6 = 3x2x6 CSO
C1.5/1-8 = 1.5x1x8 CSO
Group 2 Bearing Frame:
C3/1.5-8.5 = 3x1.5x8.5 CSO
C3/2-8.5 = 3x2x8.5 CSO
C4/3-8.5 = 4x3x8.5 CSO
C6/4-8.5 = 6x4x8.5 CSO
C2/1-10 = 2x1x10 CSO
C3/1.5-11 = 3x1.5x11 CSO
C3/2-11 = 3x2x11 CSO
C4/3-11 = 4x3x11 CSO
C6/4-11 = 6x4x11 CSO
C3/1.5-13 = 3x1.5x13 CSO
C3/2-13 = 3x2x13 CSO
C4/3-13 = 4x3x13 CSO
C6/4-13 = 6x4x13 CSO
Group 3 Bearing Frame:
C8/6-13 = 8x6x13 CSO
C10/8-13 = 10x8x13 CSO
C8/6-15 = 8x6x15 CSO
C10/8-15 = 10x8x15 CSO
For those that do not know, the first number in the above pump designation refers to the suction nozzle nominal bore, the second to the discharge nominal bore, and the third to the full impeller diameter.
As with the original range, the Tuff Pumps C Series equivalents can be supplied with standard gland packed stuffing boxes, mechanical seals, or dynamic/expeller type sealing arrangements.