|
|
 |
|
 |
|
|
首页 >>> 产品目录 >>> shell壳牌V9930润滑油
|
|
产品[卡特CAT泵液压油]资料
|
如果您对该产品感兴趣的话,可以
产品名称:
卡特CAT泵液压油
产品型号:
6105
产品展商:
大湖机械(中国)有限公司
简单介绍
卡特CAT泵液压油经过验证的设计与优质的组件确保长期的效能CAT PUMPS OIL1.特制的同轴、高密度、抛光处理、实心陶瓷柱塞，耐磨且延长水封寿命。2.CATPUMP独家精心研制的高压水封，提供无可比拟的效能与水封寿命。3.100%湿式活塞杯/水封设计，让液体冷却且润滑在两侧的橡胶材料，延长使用寿命。4.高强度不锈钢柱塞杆，有一个360度支撑的十字头，具备不易改变的柱塞杆对心准度。
|
|
卡特CAT泵液压油的详细介绍 |
卡特CAT泵液压油经过验证的设计与优质的组件确保长期的效能CAT PUMPS OIL1.特制的同轴、高密度、抛光处理、实心陶瓷柱塞，耐磨且延长水封寿命。2.CATPUMP独家精心研制的高压水封，提供无可比拟的效能与水封寿命。3.100%湿式活塞杯/水封设计，让液体冷却且润滑在两侧的橡胶材料，延长使用寿命。4.高强度不锈钢柱塞杆，有一个360度支撑的十字头，具备不易改变的柱塞杆对心准度。 CAT PUMPS OIL Establishing a regular crankcase oil change schedule is one of the most important steps in preventative maintenance and to assure long pump life. Check for oil in the crankcase before starting your pump. Running your pump without oil will VOID Periodically inspect to assure the oil level is at the red dot or midpoint on the gauge.Remove the oil cap on the top of the crankcase and inspect for water or other contaminants in the oil.Change immediately, if discolored or contaminated.Change initial fill after 50 hours running period.
Change oil every 3 months or at 500 hour intervals thereafter.Pumps using wicks should be periodically lubricated through the access holes on the top front of the crankcase.See Tech Bulletin 024 on lubrication of the Lo-Pressure seals.Larger pumps often use oilers.Oilers should be filled at start-up and opened for a minimum of thirty minutes prior to start-up.Adjust drip rate after start-up according to operating cycle of pump.(Approximately 2-3 drops per hole per week for typical installation.) See Tech Bulletin 024.
|
|
|
|
|