pnr工业喷嘴

Descaling Nozzles
Used in the steel industry.
Materials: hardened stainless steel, tungsten carbide.
PDF

Disc Washing Nozzles (Type GE), flat jet High impact. High pressure operation (up to 300 psi).
Flow rate range @ 40 psi: 0.13 - 5 gpm. Spray angles: 0º and 60º.
Materials: 304 stainless steel.
Typical applications: felt washing in paper mills (see felt washing showers).
PDF

Paper Side Cutter (Type UE), flat jet.
High impact. Forceful, straight spray. High pressure operation (up to 300 psi).
Flow rate range @ 40 psi: 0.04 - 0.7 gpm. Spray angle: 0º.
Materials: sapphire (orifice), brass (body) and 304 stainless steel (filter).
Typical applications: side-cutting operation on paper making machines.
PDF

Ultrasonic Nozzle
Full cone air-atomizing type. Very small drops (smaller than those from any other type of air-atomizing nozzle). High noise level. Uses supersonic air pressure waves to create small drops. Flow rate range: 0.3 - 46 gph.
Spray angle: 15º.
Materials: 303 stainless steel (head), 303 stainless steel and brass (body).
Typical applications: humidification.
PDF

Air Nozzles, round jet
Laminar stream. Limited noise.
Flow rate range: 9 - 21 cfm @ 30 - 90 psi. Materials: anodized aluminum (body), 303 stainless steel (nipple).
Typical applications: blow off, cooling, drying cleaning.
PDF

Air nozzles, flat jet
16 orifices. Uniform layer of air. Limited noise. Flow rate range: 9 - 33 cfm @ 15 - 75 psi. Material: polyacetal resin.
Typical applications: blow off, cooling, drying cleaning.
PDF

Hot Water Wash Gun/Lances
Rubber cover. Ergonomically designed trigger. Mimimizes hot water usage. Available with a variety of lances.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: nickel-plated brass casting (body), 316 stainless steel (stem and trigger), EDPM (cover).
Typical applications: washing.
PDF

High Pressure Spray Gun/Lances
Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 - 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
PDF

Eductors (Types UPB/UPD)
One-piece construction. Increases circulation rate fourfold. Flow rate range: 9 - 37 gpm (UPB); 16 - 340 gpm (UPD).
Pressure range: 15 - 75 psi.
Materials: fiberglass reinforced polypropylene or 316 stainless steel (UPB); polypropylene, 316 stainless steel or tool steel (UPD).
Typical applications: agitation of liquids in tanks where settling is unacceptable, steam heating processes in water tanks.
PDF

Internal Filters
Hat-shaped with flange, cartridge and threaded types.
Materials: copper, 303 stainless steel, 316 stainless steel, brass, nylon (bodies); 304 stainless steel, 316 stainless steel (mesh). Typical applications: nozzles and nozzle tips with small orifices where clogging can be a problem.
PDF

Pipe Clamps
Wide variety available. Fabricated from a wide range of materials.
Types: rigid, spring designs, cam and lever, ball types for variable orientation.
PDF

Swivel Joints
Accommodate a wide variety of nozzles. Allow a wide range of orientation possibilities. Materials: 304 stainless steel, 316 stainless steel, brass.
PDF

Lock Nuts
Specialty types of nuts for use with various PNR products.
PDF

Nipples
Available in a variety of configurations for use with G series nozzle tips and for other applications.
Fabricated in a wide range of materials.
PDF

Quick Coupling Joints
Provide a safe and rapid means to connect pipes together.
Materials: 316 stainless steel and fiberglass-reinforced polypropylene
PDF