knoll泵

 

			Datasheet (1.9 MB)
	Centrifugal pump T Areas of application KNOLL centrifugal pumps are suitable for immersion into the medium. They can be mounted on pressureless tanks or chutes. The pumps are applied at machine tools for supply with cleaning of cooling lubricant as well as application on cleaning equipment and degreasing units. There are 4 different types available: Type TG with closed impeller For precleaned coolant lubricant, volume flow up to 1600 l/min, pressure up to 6 bar, grain size up to 3 mm Type TF with open impeller For dirt coolant lubricant, volume flow up to 1000 l/min, pressure up to 2.4 bar, grain size up to 30 mm Type TS with normal helical gear For dirt and aerated coolant lubricant, volume flow up to 600 l/min, pressure up to 1.8 bar, grain size up to 15 mm Type TSK with short helical gear For coolant lubricant containing short chips, volume flow up to 700 l/min, pressure up to 2.3 bar, grain size up to 20 mm Function - Vertical design - Normal suction, single stage, without sealing - Extended taper bore mounted motor axle without sealing - Pressure connection is radial and bent upwards, suction connection is axial - With pump plate and pressure pipe Properties 1. Very high efficiency because of flow favourable formed impeller 2. High rigidity with its solid

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!