|
|
|
FOR THE RESISTANCE OF DRY RUNNING
|
|
1.
|
Valveless construction |
| |
A unique valveless mechanism (internationally patented) helps retain water inside the pump even without a check valve when the pump is turned off. This prevents the pump from running dry and is another feature of our advanced valveless technology.
|
| 2. |
Internationally patented PPS bushing construction:
a). Radiation of heat for "high heat resistance"
b). Superior endurance in case of "dry running" |
| |
|
When most pumps run dry, the friction from the contact points will cause parts, such as the shaft and the bushing, to break down from excess heat. The original anit-heat construction of GV/GVF prevents the pump from a heat deformation because the materials used for the contact point works in lowering the temperature by radiating and insulating heat.
|
 |
|
| |
|
3.
|
Air-lock free construction |
| |
When air enters the chamber during operation, it will create an air pocket within a rear casing. However, the unique internal design of our rear casing and the bushing will direct and release the air as well as heat and slurry.
? |
| |
|
Rear Casing
|
Bushing
|
|
|
|
|
|
|
Side View
|
Top View
|
Side View
|
Cross Section
|
|
|
The original air-releasing construction of the rear casing is useful for the prevention of the "air lock" problem. |
|
|
Carbon fiber, adopted for the reinforcement of the rear casing, makes the pump strong against burst pressure. |
|
|
|
Internationally patented PPS bushing construction |
|
|
A selection of the bushings available for the different types of chemicals and the presence of slurry. (Common parts used to minimize stock requirements) |
|
|
Available bushing materials are: carbon, ceramic, and SiC. |
|
|
