LVP Series Vane Pumps
Stainless Steel Vane Pumps for Corrosive, Thin Liquids at Higher Pressures
		Vane pumps are used for liquid transfer applications from chemicals to liquefied gases. Vanes extend from slots in the rotor, sweeping liquid through a cam-shaped cavity. The vanes provide very low slip and high volumetric efficiency for lower total cost of ownership.
	(click on pump to animate)
	LVP Series' Performance Range   Capacity 0 to 36 M3/Hr 0 to 160 GPM   Pressure 0 to 14 Bar 0 to 200 PSI   Viscosity 0.1 to 500 cSt 28 to 2,300 SSU   Temperature -51C° to +260°C -60°F to +500°F
The Viking® Advantages
Advanced Durability
Viking's LVP series vane pump sets the benchmark for durability with its standard, stainless steel casing surface-hardened to 62 Rockwell C maximizing casing and vane life. Its hardened chrome oxide coated shaft turns in a hard silicon carbide bearing, providing industry leading pressure capabilities to 14 Bar (200 PSI). The LVP pump's self-adjusting, PEEK® plastic vanes and push rods provide superior vacuum capabilities.
Ease of Installation
Pump installation has never been easier. The LVP series' DIN or ANSI standard porting simplifies connection to local-standard systems, and eliminates adapter leak points. To protect the pump from over-pressure, a top-mounted adjustable pressure relief valve is standard. For those applications utilizing local or remote monitoring systems, Viking's LVP series provides standard gauge ports. A rotatable casing with motor mount option, on two smallest models, permits vertical or horizontal porting. With motor speed operation up to 23 M3/Hr @ 50 Hz (100 GPM @ 60 Hz). Viking has eliminated a speed reducer and one shaft alignment, a coupling, and guard to simplify installation, reducing system costs.
Application Flexibility
Viking's LVP series' delivers broad chemical compatibility with its advanced durability features and higher pressure capabilities [14 Bar (200 PSI)], on even the thinnest liquids, enables the pump to be an ideal fit for multiple liquids and applications. Its self-priming, short-term dry-run-capability and bi-directional pumping design is ideal for loading/unloading, or line stripping operations. The LVP series delivers non-pulsing, low-shear flow with superior vacuum capability and volumetric efficiency to deliver the same capacity on thin liquids as a stainless steel gear or screw pump, using less energy.
Lower Cost of Ownership
The LVP series' easy-to-pipe, straight-through porting design with raised-face IEC or NEMA flanges, elastomeric O-ring seals on the head, relief valve, and seal gland provide superior sealing reliability. This series is also built with fewer parts, minimizing maintenance. For example, the interchangeable discs on the front and back side of the rotor can be switched and reversed for twice the life. In 20 minutes, a vane replacement service can be completed without removing the pump from its system, reducing maintenance time and life-cycle costs. Designed for use with more than 200 thin liquids, the LVP series has tailored sealing solutions available for virtually every liquid and application to minimize leaks, for a lower total cost of ownership.
Applications
Materials of Construction
Specifications
Dimensions

About Viking	Applications	Products	Distribution	Contact Us	Service	Engineering	Employment	Home
Privacy Policy		Terms of Access		Copyright© 2003.  Viking Pump Inc., A Unit of IDEX Corporation.