proconMagDrive Series2/3 Pumps procon MagDrive Series 2/3 Pumps 江苏弗里森流体工程技术有限公司

Series 1 Pump

PROCON's Series 1 pumps have the protection of an integral inlet strainer. The standard strainer is a 100 mesh wire screen. It traps particles that can cause serious damage to the pump. The strainer is equipped with a removable cap to allow periodic cleaning, every 4 months under normal conditions (more frequently with hard or turbid water). The clamp-on mounting style is shown in the photo; bolt-on mounting is also available.

Applications include: Carbonated water for soft drink dispensers, Espresso coffee machines, Beer cooling systems, cooling for TIG Welders, Reverse Osmosis systems, ultra-filtration systems, cooling circulation, constant temperature control, atomizing / misting systems, Automated pesticide misting systems, carwash machines, steam cleaning machines, cooling for X-Ray and medical lasers, water purification, boiler feeds, pressure booster pumps, and light hydraulic oils.

proconMagDrive Series2/3 Pumps

Series 2 Pump

PROCON's Series 2 pumps have the same features as the Series1 except they do not have the integral strainer. Series 1, 2 and 3 are available in 11 flow rates: 15, 25, 35, 50, 60, 70, 80, 100, 110, 125 and 140 gallons per hour at 250 psi. Clamp-on mounting style is shown in the photo; bolt-on mounting is also available.

proconMagDrive Series2/3 Pumps

Series 3 Pump

PROCON's Series 3 pumps boast all the unique design features of other PROCON pumps. Because the pump body and all the internal metal parts are made from stainless steel, the Series 3 is well suited for pumping a variety of fluids not suitable with brass. Your PROCON factory representative can advise you on the correct pump for the fluids you intend to use. Clamp-on mounting style is shown in the photo; bolt -on mounting is also available.

proconMagDrive Series2/3 Pumps

Series 4 Pump

PROCON's Series 4 is designed and built to meet your needs for flow rates ranging from 115 to 330 gallons per hour at 250 psi. This PROCON pump maintains all the quality features and construction of our Series 1, 2, & 3 pumps. Clamp-on mounting style is shown in the photo; bolt -on mounting is also available.

proconMagDrive Series2/3 Pumps

Series 5 Pump

PROCON's Series 5 is designed and built to meet your needs for flow rates ranging from 115 to 330 gallons per hour at 250 psi. This PROCON pump maintains all the quality features and construction of our Series 1, 2, & 3 pumps. Clamp-on mounting style is shown in the photo; bolt -on mounting is also available.

proconMagDrive Series2/3 Pumps

Series 6 Pump

PROCON's Series 6 is designed and built to meet your needs for higher flows. The flow rate capacity for this pump ranges from 300 to 660 gallons per hour at 250 psi. This series pump is available only in bolt-on style. No integral relief valve is available.

proconMagDrive Series2/3 Pumps

MagDrive Series 2/3 Pumps

Due to the elimination of the mechanical seals, PROCON’s family of MagDrives provides you with a virtually leak proof pump. They are designed for those applications which use a “hard to contain” fluid (e.g. glycols, oils, low surface tension fluids, etc.). PROCON’s Series 2 and 3 MagDrives are available in 11 flow rates: 15, 25, 35, 50, 60, 70, 80, 100, 110, 125 and 140 gallons per hour with discharge pressures up to 180 psi. Brass or stainless steel construction is available.

proconMagDrive Series2/3 Pumps

MagDrive Series 5 Pump

Due to the elimination of the mechanical seals, PROCON’s family of MagDrives provides you with a virtually leak proof pump. They are designed for those applications which use a “hard to contain” fluid (e.g. glycols, oils, low surface tension fluids, etc.). PROCON's Series 5 MagDrive pump is designed and built to meet your needs for flow rates ranging from 115 to 330 gallons per hour at 250 psi. This PROCON pump maintains all the quality features and construction of our Series 2 & 3 MagDrive pumps.

-proconMagDrive Series2/3 Pumps

MagDrive Series 6 Pump

Due to the elimination of the mechanical seals, PROCON’s family of MagDrives provides you with a virtually leak proof pump. They are designed for those applications which use a “hard to contain” fluid (e.g. glycols, oils, low surface tension fluids, etc.). PROCON's Series 6 MagDrive is designed and built to meet your needs for higher flows. The flow rate capacity for this pump ranges from 300 to 660 gallons per hour at 250 psi. No integral relief valve is available.

proconMagDrive Series2/3 Pumps