|
|
 |
|
 |
|
|
首页 >>> 产品目录 >>> 电化学仪器仪表
|
|
产品[sensonix ce-8e工业电导率控制器]资料
|
如果您对该产品感兴趣的话,可以
产品名称:
sensonix ce-8e工业电导率控制器
产品型号:
sensonix ce-8e工业电导率控制器
产品展商:
其他品牌
简单介绍
sensonix ce-8e工业电导率控制器
■ CHARACTERISTIC
● Equipped with the newly-developed alternating 5-pole sensor. A user can continuously measure the high concentration rate.
● The conductivity-r
|
|
sensonix ce-8e工业电导率控制器的详细介绍 |
sensonix ce-8e工业电导率控制器
 |
 |
|
| |
 |
|
| ■ |
CHARACTERISTIC |
| ● |
Equipped with the newly-developed alternating 5-pole sensor. A user can continuously measure the high concentration rate. |
| ● |
The conductivity-rate, temperature and the salt concentration rate of sea-water can be measured. The temperature measurement element is at Pt1000Ω. |
| ● |
The standard temperature and temperature compensation can be set optionally. It minimizes the errors which occur due to differences in temperature or components of solution. |
| ● |
It corresponds to wide range of voltage in AC90V~260V. Therefore it can be used domestic and foreign markets. |
| ● |
It is equipped with the isolated transmission output. And the output range can be measured. Also it can easily be connected with a computer. |
| ● |
As the error message is given, the maintenance work can easily be done. |
| ● |
The control action at 2 points can be set optionally. |
|
|
| |
|
| |
 |
■SENSOR
| Quality of material which contacts with solution : |
PVC, titanium, SUS316 |
| Temperature of measuring solution : |
0～50℃ |
| Pressure of measuring solution : |
0～0.5MPa（0～5kgf/cm2） |
| Cell constant: |
about 1,000 |
| Length of lead: |
10m（standard）、30m（maximum） |
|
|
■WIRING TABLE
■SPECIFICATION
| Model |
CE-8E |
| Measurement range |
1.00/2.00/5.00/10.0./20.0mS/cm (transmission rate mS/cm)
1.00/2.00/5.00/10.00/20.0mS/cm 1000/2000/5000.S/cm (transmission rate S/cm)
0～4.0% (Salt concentration rate)(temperature at 0~40 ℃)
0～100 ℃ (temperature) |
| Accuracy |
±5%FS |
| Control output and Signal output |
IC contact point output : 2 points (independent)
Contact capacity : AC250V, 3Amax (resistant load) |
| Transmission output |
DC4～20mA input/output isolated type
(Transmission output of temperature is not attached.)
Maximum load resistance : 500, Straight line ± 0.5%FS |
| Temperature compensation |
Standard temperature at 25℃ (option setting available: 5~95℃)
Range of temperature range 0~100℃ Accuracy ±1%FS |
| Surrounding condition |
The unit itself : -5~40℃ less 85%RH |
| Temperature of sample solution |
0～50℃ |
| Structure |
The unit itself : Panel attachment type to be installed indoor.
Sensor : Throwing or screwing type
Quality of contacting part : PVC, titanium, SUS316 Length of lead : 10m (standard) |
| Power supply |
AC90～260V 50/60Hz 10W |
| Weight |
The unit itself : About 650kgs |
| Painting |
The unit itself : SPCC Panel : ABS |
|
 |
|
|
|
|
|
|
