Click here to receive additional information

Services

Pump Installation and Service

Custom Pump Design

Our dedicated staff of design engineers can put together a pump to fit your specific application. There is no need to settle for the closest thing you can get, when you can get exactly what you need.

Products

VORTEX MODELS
        8 sizes offering up to 400 foot head and 2800 GPM capable of handling solids up to 6 inches

DIAPHRAGM
        Want to safely and cost effectively transfer all of your process and waste fluids? We have what you need.

SHC
        15 different sizes offering up to 440 foot head and 3000 GPM capable of handling solids up to 3 inches

VERTICAL FULLY CANTILEVER
        Allows center-line stlye pumps to be extended up to 1 1/2 meter

DIN 5440 Series
        The DIN 5440 Series will meet all the specifications of DIN 5440

ANSI B 73.1 Specification Horizontal End Suction

The 7071 Series is a horizontal, open impeller centrifugal pump that meets the specifications of ANSI B-73.1. The series consists of 3 power end and 25 pump sizes

7550 Series Vertical Centrifugal End Suction

The Gusher 7550 Series has been designed to give heavy duty pumping service in a wide range of industrial applications including spray booths, industrial spray washers, paint, and coolant systems.

Sizes range from 1" to 8" discharge with heads up to 275 feet @ 1750 RPM and capacities up to 2800 GPM.

7600 Series Vertical Top Pull Out Centrifugal End Suction

This Series has been designed to minimize maintenance. If maintenance is required, the top pull out design allows the rotating element to be removed without disturbing the mounting plate or piping. Sizes range from

1" to 8" discharge with heads up to 275 feet @ 1750 RPM and capacities to 2800 GPM.

7600 Series Horizontal Back Pull Out Centrifugal End Suction

The back pull out design of the Gusher 7600H Series saves downtime and maintenance costs by providing easy removal of rotating assembly for fast repairs. These pumps are available in coupled, coupled base mounted, and close coupled configurations. Sizes range from 1" to 8" discharge with heads up to 275 feet @ 1750 RPM and capacities up to 2800 GPM.

7800 Series Vertical and Horizontal Centrifugal End Suction

The 7800 Series includes our jet pump, self priming pumps, vertical and horizontal close coupled pumps, direct drive pumps and some models with a range from 0 to 600 GPM @ 3450 RPM and head up to 150 feet.

8000 Series Horizontal Centrifugal Self-priming

The 8000 Series is designed for a wide range of uses from agricultural to industrial, including filtration, irrigation, dewatering,transfer, industrial sump, shallow sump washers, and tank car unloading. Priming and air separation are accomplished within the casing, there are no external valves, air separator, or priming chamber required. Sizes range from 1 1/4" to 6" discharge with heads up to 130 feet @ 1750 RPM and capacities to 1200 GPM.

High Pressure Centrifugal Multi-Stage

Gushers Multi-stage pumps offer pressures of up to 400 PSI. Some models also offer dual discharges, one for low volume and high pressure, and another for low pressure and high volume.

Replacement Centrifugal Coolant Pumps for Imported Machine Tools

Gusher offers replacement machine tool coolant pumps for Fuji, Mitsubishi, Toshiba, Hitachi, and Yasukawa. Contact our Sales department for your specific application.

Molten Metal Vertical Centrifugal

Gushers Molten Metal pumps handle lead, babbitt, solder, tin, zinc, spelter, and other molten metals at temperatures up to 1200篎. These pumps are standard with stainless steel shaft, pump parts made of cast iron, and carbon steel screws.

Tank Units and Accessories

These general purpose units are widely used for supplying coolant to machine tools not otherwise equipped with a coolant system. Available in standard reservoir sizes from 10 to 200 gallons with pumps from 1/25 through 7 1/2 hp, Gusher tank units may be used as permanent, portable, or auxiliary coolant systems.

Gusher Rumaco Pumps

Some Gusher-Rumaco centrifugal, open impeller type pumps can be equipped with self adjusting seals so that the units can be installed either vertically or horizontally at or below the liquid level.

Immersed Types

Gushers immersed type machine tool & and industrial coolant pumps come in five basic configurations.

Flange Mounted Types

Flange mounted pumps should be selected when space is limited and an immersed type pump cannot be used. These pumps are mounted directly to the outside of the reservoir solving limited space problems.

Centrifugal Truck Pump

With capacities up to 750 GPM @ 2250 RPM and heads to 140 feet, Gusher's centrifugal truck pump is ideal for many agricultural and industrial uses.

产品留言

标题

联系人

联系电话

内容

验证码

点击换一张

注：1.可以使用快捷键Alt+S或Ctrl+Enter发送信息!
2.如有必要,请您留下您的详细联系方式!