TONKAFLO PUMPS P/N 1120693润滑油
Tonkaflo SS Pumps
Tonkaflo SS series multistage centrifugal pumps
As the industry standard for reverse osmosis (RO),TONKAFLO SS Series pumps are backed by years of proven experience. The SS Series is a stainless steel multi-stage centrifugal pump with Noryl* plastic impellers. To reduce pump wear, SS Series pumps operate at lower speeds than single-stage pumps while achieving equivalent boost
pressures. The SS Series’ flexible, multi-stage design allows users to achieve their exact pressure requirements by adding or removing stages.
Offering the broadest range and best value, the SS Series sets the standard for the RO industry and serves as the standard for all Tonkaflo pumps.
4-inch (101.6 mm) and 6-inch (152.4 mm) 316SS shell shaft, inlet and discharge housings
Noryl plastic stages
Flow capacity of 1.5 to 300 gpm (0.34 to 68.1 m3/h)
Pressures up to 700 psid (48.3 bar)
Model A B C D
SS 500-inches 3.6 6.8 38.6-61.7 49.8-75.6
(mm) (91) (173) (980-1567) (1265-1920)
SS 1800 3.6 7.6-9.4 32-67.3 46-82.8
(91) (193-239) (813-1709) (1168-2103)
SS 2800 3.6 7.6-9.4 34.8-88.9 46-103.4
(91) (193-239) (884-2258) (1168-2626)
SS 5500 5.4 8.8-10.5 27.6-47 41.5-62.5
(137) (224-267) (701-1194) (1054-1588)
SS 8500 5.4 8.8-10.5 29.6-47 43.5 -61.5
(137) (224-267) (752-1194) (1105-1562)
SS 12500 5.4 8.8-10.5 27.8-41.6 41.7-56.1
(137) (224-267) (706-1057) (1059-1425)
SS 24000 5.4 10.8 30.8-39.4 43.2-61.4
(137) (274) (782-1001) (1097-1560)
流量：300GPM
压力: 700psig
total discharge head pressure to 1000psig
vertical and horizontal mounting models
separate bearing frames
standard motor sizes up to 100HP
corrosion resistant modular design
作为行业标准反渗透（反渗透）,TONKAFLO SS系列泵是由多年的经验证明。SS系列不锈钢多级离心泵与塑料叶轮，为了减少泵磨损，SS系列水泵运行于较低速度比起单级泵来，同时实现相当于提高压力。多阶段的设计可以让用户实现其确切的压力，旨在迎接挑战的工业膜系统， SS系列泵可以用在任何高压应用。 TONKAFLO SS系列泵是理想的提高和再循环水在建筑物，高压传输，和喷雾方面的应用。
提供了***的流量和压力，TONKAFLO SS系列设定了标准的反渗透工业和服务为标准。
