|
意大利salami齿轮泵 Gear pumps and motors Gear pumps, motors and dividers in alluminium alloy. GROUP 1 , 1.5 , 1.6 Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards. Displacements from 1.1 to 5.5 cm3/rev for 1 PB, from 1.1 to 7.5 cm3/rev for 1.5 P/MB and from 1.4 to 6.1 cm3/rev for 1.6 P/MB. GROUP 2 , 2.5 Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards. Displacements from 4.5 to 26 cm3/rev for 2 P/MB and from 16 a 44 cm3/rev for 2.5 P/MB. GROUP 3 , 3.5 , 4 Gear pumps and motors in aluminium alloy, available in European, German and U.S. standards. Displacements from 21to 65 cm3/rev for 3 P/MB, from 55 to 87 cm3/rev for 3.5 P/MC and from 68 to 142 cm3/rev for 4 PB. ADVANTAGES: Low noise level Easy combination in multiple units High efficiency Considerable reliability 2PZ Face gear pumps in aluminium alloy, available in European, German and U.S. standards. Displacements from 5 to 22.5 cm3/rev. ADVANTAGES: Important reduction of noise level in comparison with traditional external gear pumps Especially suitable for all applications where a low noise level is required, such as: AC and DC electro-power units. Gear pumps, motors and dividers in spheroidal cast iron. 3 HP/M Gear pumps and motors in spheroidal cast iron. Displacements from 31 to 90 cm3/rev. Available in U.S. standard. ADVANTAGES: Developed for high loads Oil contamination and non flammable fluids resistant
|